cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco Community Designated VIP Class of 2020

1856
Views
0
Helpful
1
Replies
Highlighted
Beginner

CME Intial configuration help

Hello All. First of all, thanks in advance for any assistance you might give me regarding this.

First of all, my task is to configure CME using a 2921 router and also installing Cisco Unity Express. To both of these tasks I am a total newbie. I have been supplied with tips and example configs from colleagues, however, none seem relevant to what I am actually faced with.

To begin with I  informed that I would be supplied with a "2921 UC bundle w/PVDM3-32, FL-CME-SRST-25, UC License PAK

So, when I started up the router I expected to see a voice ios, however what I have is

C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(3)T1

When I do a show license i see the following

yourname#sho license detail cme-srst

Feature: cme-srst                        Period left: 8  weeks 4  days

Index: 1        Feature: cme-srst                          Version: 1.0

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 4  days

            Period used: 0  minute  0  second

        License Count: 0/0  (In-use/Violation)

        License Priority: None

        Store Index: 7

        Store Name: Built-In License Storage

yourname(config)#telephony-service setup

Warning: <telephony-service setup> command has been deprecated.

For installation help, please check CME System Administrator Guide.

Goodbye!

yourname#sho license detail cme-srst
Feature: cme-srst                        Period left: 8  weeks 4  days
Index: 1        Feature: cme-srst                          Version: 1.0
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
            Evaluation total period: 8  weeks 4  days
            Evaluation period left: 8  weeks 4  days
            Period used: 0  minute  0  second
        License Count: 0/0  (In-use/Violation)
        License Priority: None
        Store Index: 7
        Store Name: Built-In License Storage

I have gone through the process of activating the license by accepting the enduser agreement, however the license still shows as

License State: Not in Use, EULA not accepted

To see if I could use the features i typed in the command

#telephony-service setup

However it informed me that this command has now been deprecated?

Do i still need to download the CME software from Cisco, even though I have a UC Bundle, I thought that was the idea of universal ios?

Can someone plase put me on the correct path to getting this installed? your help again is greatly appreciated.

Brian

Everyone's tags (2)
1 REPLY 1
VIP Mentor

CME Intial configuration help

Brian,

You need to download CME files that is compartible with the IOS of the router running on your router..This does not come automatically with the gateway. The link below will show you what CME files you need based on your IOS.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm

On the licensing, read this document that explains what you need to do...

https://supportforums.cisco.com/docs/DOC-26706

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

Please rate all useful posts
CreatePlease to create content
Content for Community-Ad
FusionCharts will render here