cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
261
Views
0
Helpful
1
Replies

cme ip phones help

Mohammed Al-odhari
Enthusiast
Enthusiast

Hi,

Ina company which uses cisco call manager express with ip phones 7931, 7945 ,7975, 7911,7962…….

1- i want the configuration in which the user dial a pin code befor doing an outside call...?

2- i want to change the defalt configuration for the ip phones of days backlight not active to thursday and friday and the backlight in duration to 1:30.?

i did the followings commands but it doesn`t take an effect.

Router(config)# telephony-service

Router(config-telephony)# service phone daysBacklightNotActive 6

Router(config-telephony)# service phone backlightOnDuration 1:30

Router(config-telephony)# service phone backlightIdleTimeout 01:00

Router(config-telephony)# create cnf-files

Router(config-telephony)# reset all

3- i have ringtones files in the flash (sh flash attached) , i want all the ringtones appear on all the ip phones when i press settings then user prefrences and then rings- i can only see two ring tones.

thanks for your help

1 REPLY 1

frlindse
Cisco Employee
Cisco Employee

Try

Router(config)# telephony-service

Router(config-telephony)#  service phone daysBacklightNotActive  5,6

Router(config-telephony)#  service phone backlightOnDuration 01:30

Router(config-telephony)#  service phone backlightIdleTimeout 01:00

Router(config-telephony)#  create cnf-files

Router(config-telephony)# reset all

Also

What firmware version is on the phone?

What version of IOS/CME?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: