cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
458
Views
0
Helpful
3
Replies
Paul Cobley
Beginner

CME Multi tenant

So, one of our customers has sublet some of their office space to a tenant. The tenant is sharing the CME (8.8). Is there a way to have a different System Message on half of the phones so the handsets read the correct compnay name ?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Rob Huffman
Hall of Fame Community Legend

Hi Paul,

The System message Display is applied to all phones on CME. You could

leverage the Header Bar Display perhaps which can be configured on a set by set

basis. Turn off the System message Display so it shows Cisco and customize the

separate companies using the Header Bar Display

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html#wp1018070

Cheers!

Rob

"Show a little faith, there's magic in the night" - Springsteen

View solution in original post

3 REPLIES 3
Rob Huffman
Hall of Fame Community Legend

Hi Paul,

The System message Display is applied to all phones on CME. You could

leverage the Header Bar Display perhaps which can be configured on a set by set

basis. Turn off the System message Display so it shows Cisco and customize the

separate companies using the Header Bar Display

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html#wp1018070

Cheers!

Rob

"Show a little faith, there's magic in the night" - Springsteen

View solution in original post

Thanks Rob - you are always very helpful.

Rob Huffman
Hall of Fame Community Legend

Hi Paul,

You are most welcome my friend

Cheers!

Rob

"Show a little faith, there's magic in the night" - Springsteen

Content for Community-Ad

Spotlight Awards 2021