CME SIP phone huntgroup list limitation?

[samhopealpha]

Hi all,

I would like to ask

In CME, does SIP phone huntgoup list has limitation?

Can I define 100 members(numbers) in the list? (if using hunt-group parallel)

Router(config)# voice hunt-group 4 parallel

Router(config-voice-hunt-group)# pilot 1000

Router(config-voice-hunt-group)# list 1001, 1002, 1003, 1004, ... .... ... , 1098, 1099, 1100

Thank you

Sam

[Jaime Valencia]

Such is discussed in the CME config guide

Added support for the following on IP phones running SCCP:

•Maximum number of hunt groups in a system was increased from 20 to 100 and maximum number of agents in a hunt group was increased from 10 to 20.

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmecover.html

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

[samhopealpha]

so, it is not possible to hunt for 100 numbers ?

I tried the following config, that has a main "hunt-group 1", contains sub group of "hunt-group 2", "hunt-group 3", and "hunt-group 4". .... but it seems only the first sub-group can be reached ...

voice hunt-group 1 parallel

pilot 1000

list 1100, 1200, 1300

voice hunt-group 2 parallel

pilot 1100

list 1101, 1102, 1103, ...... 1110

voice hunt-group 3 parallel

pilot 1200

list 1201, 1202, 1203, ....  1210

voice hunt-group 4 parallel

pilot 1300

list 1301, 1302, 1303, ....  1310

Do I make anything wrong and mistake?

Thanks

Sam