11-05-2014 04:44 AM - edited 03-17-2019 12:48 AM
Hi All
The incoming call transfer I cannot possible to Sip to Sccp phone sccp to sccp is transfer is working .
Sip phone 8961
sccp phone 7945,6921
please check configuration
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service h450.2
no supplementary-service h450.3
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
h323
sip
registrar server expires max 300 min 60
oice register dn 1
number 0
call-forward b2bua noan 999 timeout 20
allow watch
name Operator
label Operator
voice register pool 1
id mac 1CAA.0710.0AC1
type 8961 addon 1 CKEM
number 1 dn 1
template 1
dtmf-relay rtp-nte sip-kpml sip-notify
username cisco password cisco
codec g711ulaw
no vad
camera
video
telephony-service
sdspfarm units 3
sdspfarm tag 1 conference
conference hardware
conference transfer-pattern
video
no auto-reg-ephone
max-ephones 100
max-dn 250
ip source-address 192.1.1.111 port 2000
system message LCC_SIPOREX
time-zone 31
date-format dd-mm-yy
voicemail 999
mwi reg-e164
max-conferences 8 gain -6
web admin system name admin secret 5 $1$qHe3$xblvRD1ouV4jr8RcGUiMM.
dn-webedit
time-webedit
transfer-system full-consult
create cnf-files version-stamp Jan 01 2002 00:00:00
Thank you
Solved! Go to Solution.
11-19-2014 07:34 AM
Genius post, Martin!
11-05-2014 04:53 AM
Hi @,
Try this config under the telephony-service globa configuration:
telephony-service
call-park system application
After this, re-create both configuration files (in voice register global and telephony-service):
voice register global
no create profile
create profile
telephony-service
no create cnf-files
create cnf-files
And restart the phones.
HTH.
Rgrds,
Martin, IT Specialist
11-05-2014 08:05 AM
Hi Martin
Thanks your replay i will check and update u .
11-08-2014 05:42 AM
Hi
Its problem solved thanks all
11-08-2014 08:11 AM
Good to hear that!
Did you use the commands that I provided you or did you fix it in other way? If so, please share it.
Don't forget to rate.
Rgrds,
Martin, IT Specialist.
11-19-2014 02:04 AM
Hi all
i used this command its working well
telephony-service
call-park system application
voice register global
no create profile
create profile
telephony-service
no create cnf-files
create cnf-files
Thank you
11-19-2014 07:34 AM
.
11-19-2014 07:34 AM
Genius post, Martin!
11-06-2014 04:31 AM
What do you get when you press transfer? Fast busy tone? Can you configure the DN assigned to SIP as dual-line.
Rgds,
Wilmer
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide