cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3127
Views
15
Helpful
8
Replies

CME SIP Phone to SCCP phone call transfer issue

Hi All

The incoming call transfer  I cannot possible to Sip to Sccp phone sccp to sccp is transfer is working .

Sip phone 8961

sccp phone 7945,6921

please check configuration

voice service voip
 allow-connections h323 to h323
 allow-connections h323 to sip
 allow-connections sip to h323
 allow-connections sip to sip
 no supplementary-service h450.2
 no supplementary-service h450.3
 fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
 h323
 sip
  registrar server expires max 300 min 60

 

 

oice register dn  1
 number 0
 call-forward b2bua noan 999 timeout 20
 allow watch
 name Operator
 label Operator

voice register pool  1
 id mac 1CAA.0710.0AC1
 type 8961 addon 1 CKEM
 number 1 dn 1
 template 1
 dtmf-relay rtp-nte sip-kpml sip-notify
 username cisco password cisco
 codec g711ulaw
 no vad
 camera
 video

 

telephony-service
 sdspfarm units 3
 sdspfarm tag 1 conference
 conference hardware
 conference transfer-pattern
 video
 no auto-reg-ephone
 max-ephones 100
 max-dn 250
 ip source-address 192.1.1.111 port 2000
 system message LCC_SIPOREX
 time-zone 31
 date-format dd-mm-yy
 voicemail 999
 mwi reg-e164
 max-conferences 8 gain -6
 web admin system name admin secret 5 $1$qHe3$xblvRD1ouV4jr8RcGUiMM.
 dn-webedit
 time-webedit
 transfer-system full-consult
 create cnf-files version-stamp Jan 01 2002 00:00:00

 

Thank you

 

1 Accepted Solution

Accepted Solutions
8 Replies 8

Martin Moran
Level 3
Level 3

Hi @,

Try this config under the telephony-service globa configuration:

telephony-service

 call-park system application

After this, re-create both configuration files (in voice register global and telephony-service):

voice register global

 no create profile

 create profile

telephony-service

 no create cnf-files

 create cnf-files

And restart the phones.

HTH.

Rgrds,

Martin, IT Specialist

Hi Martin

Thanks your replay i will check and update u .

Hi

Its problem solved thanks all

Good to hear that!

Did you use the commands that I provided you or did you fix it in other way? If so, please share it.

Don't forget to rate.

Rgrds,

Martin, IT Specialist.

Hi all

i used this command its working well

telephony-service

 call-park system application

voice register global

 no create profile

 create profile

telephony-service

 no create cnf-files

 create cnf-files

 

Thank you 

Genius post, Martin!

What do you get when you press transfer? Fast busy tone? Can you configure the DN assigned to SIP as dual-line.

Rgds,

Wilmer

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: