cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
753
Views
0
Helpful
1
Replies

CME sip trunks limitation

fady samir
Level 1
Level 1

Hi all, hope you are fine

well, here is my problem

I got a CME connected with PBX, the pbx sip license is only 10 sip trunks, the CME has about 80 registered phone.

There is a VIP cisco number that i need to make it reachable from the nortel pbx any time.

There are 7 outgoing dial peers for mobile calls, national, international , etc ...

I only limited the dial peers with max-con 2, so that the possibility that the 10 sip trunks is small, and added a new dial peer for the VIP number with no max-con, but the cisco phone users complain they can't make calls with the pbx lot of times.

Also i can't control the incoming sip trunk, for example, if 9 sip trunks are used, i don't need any more sip trunks incoming or outgoing except for the vip numbers.

Any ideas ?

1 Reply 1

paolo bevilacqua
Hall of Fame
Hall of Fame

You should add some licenses.

Too much limitations == too many problems.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: