Dears
am trying to integrate cme 10.5 and CUE and am facing some issues when trying to run the CUE wizard an error appears" "login as admin failed"
the username and password is 100% correct with privilege 15 all necessary commands exist under my config.
" telephony-service
web admin system name admin password cisco
dn-webedit
time-webedit
"
ip http server
ip http authentication local
ip http secure-server
ip http path flash:
"
flash contain the following files "
1 -rw- 105106168 Feb 6 2015 02:38:26 +00:00 c2900-universalk9-mz.SPA.155-1.T.bin
2 -rw- 3064 Feb 6 2015 02:52:24 +00:00 cpconfig-29xx.cfg
3 drw- 0 Mar 9 2015 14:19:18 +00:00 its
28 drw- 0 Feb 6 2015 02:52:54 +00:00 ccpexp
465 -rw- 2464 Feb 6 2015 02:56:30 +00:00 home.shtml
466 -rw- 3090804 Mar 9 2015 14:15:00 +00:00 kern78xx.10-2-1-12SR1-4.sbn
467 -rw- 35914072 Mar 9 2015 14:16:06 +00:00 rootfs78xx.10-2-1-12SR1-4.sbn
468 -rw- 364076 Mar 9 2015 14:16:20 +00:00 sboot78xx.10-2-1-12SR1-4.sbn
469 -rw- 994 Mar 9 2015 14:16:42 +00:00 sip78xx.10-2-1-12SR1-4.loads
470 drw- 0 Mar 10 2015 13:01:12 +00:00 CME 10.5.0 GUI
489 -rw- 10728 Mar 18 2015 17:17:16 +00:00 dkern8961.100609R2-9-4-2SR1-2.sebn
490 -rw- 1648608 Mar 18 2015 17:17:56 +00:00 kern8961.9-4-2SR1-2.sebn
491 -rw- 35095296 Mar 18 2015 17:23:54 +00:00 rootfs8961.9-4-2SR1-2.sebn
492 -rw- 147256 Mar 18 2015 17:25:04 +00:00 sboot8961.031610R1-9-4-2SR1-2.sebn
493 -rw- 1708 Mar 18 2015 17:25:28 +00:00 sip8961.9-4-2SR1-2.loads
"
i tried to issue the following command " ip http path flash:/CME 10.5.0 GUI" but an error appears
tried everything with no luck
