Hi All ,
I have a basic lab using two ipphones 7941G IP phones with a call manager express running on a 2621 router.
phones are registering sucessful but still I can´t see any button phone only a message showing Cisco CME
Can somebody tell what is wrong ????
Follow posted the actual conf running on router
tftp-server flash:CVM41.2-0-2-26.sbn
tftp-server flash:Jar41.2-9-2-26.sbn
tftp-server flash:TERM41.7-0-3-0S.loads
tftp-server flash:cnu41.2-7-6-26.sbn
tftp-server flash:term41.default.loads
tftp-server flash:term61.default.loads
telephony-service
max-ephones 36
max-dn 36
ip source-address 10.1.2.1 port 2000
auto assign 1 to 36
create cnf-files version-stamp Jan 01 2002 00:00:00
max-conferences 4
ephone-dn 1 dual-line
number 5000
ephone-dn 2 dual-line
number 5001
ephone-dn 3 dual-line
number 5002
ephone-dn 4 dual-line
number 5003
ephone 1
mac-address FCFB.FBCA.4714
button 1:2 2:3
Show flash
router_lab#sh flash
System flash directory:
File Length Name/status
1 19061832 c2600-ipvoice-mz.123-4.T8.bin
2 1960127 CVM41.2-0-2-26.sbn
3 707135 Jar41.2-9-2-26.sbn
4 591 TERM41.7-0-3-0S.loads
5 1998336 cnu41.2-7-6-26.sbn
6 591 term41.default.loads
7 591 term61.default.loads
8 496521 music-on-hold.au
9 820 XMLDefault.cnf.xml [deleted]
[24227128 bytes used, 9327304 available, 33554432 total]
32768K bytes of processor board System flash (Read/Write)
and show telephony
outer_lab#sh telephony-service
CONFIG (Version=3.0)
=====================
Cisco CallManager Express
ip source-address 10.1.2.1 port 2000
max-ephones 36
max-dn 36
max-conferences 4
max-redirect 5
time-format 12
date-format mm-dd-yy
keepalive 30
timeout interdigit 10
timeout busy 10
timeout ringing 180
edit DN through Web: disabled.
edit TIME through web: disabled.
Log (table parameters):
max-size: 150
retain-timer: 15
create cnf-files version-stamp Jan 01 2002 00:00:00
auto assign 1 to 36
local directory service: enabled.
