cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
113
Views
0
Helpful
0
Replies

CME9 and soft phones - no dn

mar001
Level 1
Level 1

Calling ALL CME experts ;-)

I installed a new 887 and got one IP phone to work. Unfortunately my old config does not seem to work for CIPC, I have the latest version of it. It registers but I do not get an extension number. Here is the output of show ephone reg. The second one is CIPC

 

 

CME887#sh ephone reg

ephone-1[0] Mac:0023.339D.3CA1 TCP socket:[1] activeLine:0 whisperLine:0 REGISTE
RED in SCCP ver 17/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 res
et_sent:0 paging 0 debug:1 caps:9
IP:172.16.99.20 * 24821 7906 keepalive 207 max_line 1 available_line 1
button 1: cw:1 ccw:(0)
dn 1 number 1001 CH1 IDLE
Preferred Codec: g711ulaw
Lpcor Type: none

ephone-4[3] Mac:A4DB.3007.F6B9 TCP socket:[3] activeLine:0 whisperLine:0 REGISTE
RED in SCCP ver 20/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 res
et_sent:0 paging 0 debug:1 caps:11
IP:172.16.1.27 * 53064 CIPC keepalive 20 max_line 8 available_line 8
Preferred Codec: g711ulaw
Lpcor Type: none

 

 

ephone 2
device-security-mode none
mac-address A4DB.3007.F6B9
type CIPC
button 1:2

0 Replies 0
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: