cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
462
Views
0
Helpful
4
Replies
Highlighted
Beginner

Configure 2811 as transcoding device

HI Guys,

I need your help on this..I have a customer going to install CUCM solution on multiple site.. because of bandwidth limitation some sites will be running G729 over wan and some sites are running G711.... How do i configure a cisco 2811 router which has PVDM 64 installed in it as a trancoding device..

In esence i want sites running G711 and sites running G729 talk to each other and enjoy other fancy features like conference.

Thanks in advance

regards

4 REPLIES 4
Highlighted
Hall of Fame Cisco Employee

Re: Configure 2811 as transcoding device

Configuring Enhanced Conferencing and Transcoding for Voice Gateway Routers

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf2.html

CallManager and IOS Gateway DSP Farm Configuration Example

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_configuration_example09186a0080334294.shtml

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate
Beginner

Re: Configure 2811 as transcoding device

Follow the attached document you should be fine.

Please rate if useful.

Highlighted
Beginner

Re: Configure 2811 as transcoding device

Hello my friend.

Thanks a lot for your reply.. I forgot to mention that we are using call manager 7.0 version..1 publisher and 3 subscriber servers...does this configuration still valid for my solution or configuration for transcoding will change ??

regards

Highlighted
Hall of Fame Cisco Employee

Re: Configure 2811 as transcoding device

It still works, the interface of 2nd link is just a little changed but all the IOS commands are exactly the same for any version.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate
CreatePlease to create content