Configure 3905 on CME 8.5

[Bruno Mauricio Soria Iturricha]

Hello everyone,

I have to configure a Cisco SIP phone 3905 in CME ver 8.6. I haven't found a way to do this.

• I tought about doing it with Fast Track (voice register global-type), but it is supported on CME 10 and above.
• I was thinking about registering it like a 3rd party sip phone, but I don't know where to put the username and password on the phone. The Web Admin page of the 3905 only shows info.

Any idea how can I work this out?

[Manish Gogna]

Hi Bruno,

3905 is supported with CME 9.0 onwards, please upgrade to a supported CME version.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/cme85spc-htm.html

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/cme90spc.html

HTH

Manish

[Bruno Mauricio Soria Iturricha]

Hello Manish,

I believe the UC520 does not support CME 9.0, I downloaded the latest available IOS from cisco and got version 8.6.

Is there any other way?

[Manish Gogna]

You will need to use one of the supported platforms to be able to install CME 9.0 and support 3905.

Manish