09-03-2019 10:37 AM
Hi,
mi question is, exist a line key in the config file to activate or deactivate the Electronic HookSwitch Control with tag?
Thanks adn Regards
Solved! Go to Solution.
09-03-2019 12:55 PM
You can use this tag to enable or disable
09-03-2019 12:20 PM
Hi @jorge.silva ,
Maybe what this discussion indicates can help you:
UC_560(config)#telephony-service
UC_560(config-telephony)#service phone ehookEnable 1
Regards
09-03-2019 12:40 PM
Hi Luis
Thanks for the comment
to test i use a cisco 7841 with multiplatform firm 11.2.3 MSR1-1
configure with broadsoft
in my file dont see the ehook parameter, the configure is the next
<!-- Voice/User Supplementary Services -->
<CW_Setting ua="rw">Yes</CW_Setting> <!-- Yes/No -->
<Block_CID_Setting ua="rw">No</Block_CID_Setting> <!-- Yes/No -->
<Block_ANC_Setting ua="rw">No</Block_ANC_Setting> <!-- Yes/No -->
<DND_Setting ua="rw">No</DND_Setting> <!-- Yes/No -->
<Secure_Call_Setting ua="rw">No</Secure_Call_Setting> <!-- Yes/No -->
<Auto_Answer_Page ua="rw">No</Auto_Answer_Page> <!-- Yes/No -->
<Preferred_Audio_Device ua="rw">None</Preferred_Audio_Device> <!-- Speaker/Headset/None/Bluetooth -->
<Time_Format ua="na">12hr</Time_Format> <!-- 12hr/24hr -->
<Date_Format ua="rw">day/month</Date_Format> <!-- month/day day/month-->
<Miss_Call_Shortcut ua="rw">No</Miss_Call_Shortcut> <!-- Yes/No -->
<Handset_LED_Alert ua="rw">Voicemail</Handset_LED_Alert>
<Alert_Tone_Off ua="rw">No</Alert_Tone_Off> <!-- Yes/No -->
<!-- Voice/User Audio Volume -->
<Ringer_Volume ua="rw">%Ringer_Volume_68xx%</Ringer_Volume> <!-- 0 to 15 -->
<Speaker_Volume ua="rw">%Speaker_Volume_68xx%</Speaker_Volume> <!-- 0 to 15 -->
<Handset_Volume ua="rw">%Handset_Volume_68xx%</Handset_Volume> <!-- 0 to 15 -->
<Headset_Volume ua="rw">%Headset_Volume_68xx%</Headset_Volume> <!-- 0 to 15 -->
<!-- Voice/User Screen -->
<Screen_Saver_Enable na="rw">%SCREEN_SAVER_ENABLE%</Screen_Saver_Enable> <!-- Yes/No -->
<Screen_Saver_Type na="rw">%SCREEN_SAVER_TYPE%</Screen_Saver_Type> <!-- Clock/Download Picture/Logo/Lock-->
<Screen_Saver_Wait na="rw">%SCREEN_SAVER_TIME%</Screen_Saver_Wait> <!-- Sec -->
<Screen_Saver_Refresh_Period na="rw">1</Screen_Saver_Refresh_Period> <!-- Sec -->
<Back_Light_Timer na="rw">30m</Back_Light_Timer> <!-- 1m/5m/30m/Always On -->
<LCD_Contrast na="rw">%LCD_Contrast_68xx%</LCD_Contrast>
<Boot_Display na="rw">%LOGO-TYPE%</Boot_Display> <!-- Clock/Download Picture/Logo/Lock-->
<Phone_Background na="rw">%LOGO-TYPE%</Phone_Background> <!-- Default/Logo -->
<Text_Display na="rw"></Text_Display>
<Picture_Download_URL na="rw">%ACCESS_PROTOCOL%%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%%BWFILESERVERDIR%%BWDEVICEACCESSURI%%PICTURE_88XX%</Picture_Download_URL>
<Logo_URL na="rw"></Logo_URL>
Add the line <service_phone_ehookEnable na="rw">1</service_phone_ehookEnable> ?
Thanks
Regards
09-03-2019 12:55 PM
You can use this tag to enable or disable
09-03-2019 02:29 PM
Hi bijpraka
I used the line and the parameter work perfect
Thank you very much
Regards
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: