cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4377
Views
5
Helpful
5
Replies

Configure Force Authorization Code at CME

demoschairos
Level 1
Level 1

Hi All,

Do you know on how to configure FAC at CME ?

I want to put PIN code when access to particular destination number

Thx,

Suryanto

5 Replies 5

Muhammad Nawaz
Level 1
Level 1

Hi,

     You  can set pin only on Phone level not like CUCM. In CME FAC means Feature Access Code not Force Authorization code

Hi ,

Thx for the answer.

However what should be done is I want to have an International Call to be controlled by using PIN Code.

And i configure it at CME.

BR,

SURYANTO

Hi,

    Please follow the below steps

under telephony service

login timeout 1

after-hours day Sun 00:01 23:59
after-hours day Mon 00:01 23:59
after-hours day Tue 00:01 23:59
after-hours day Wed 00:01 23:59
after-hours day Thu 00:01 23:59
after-hours day Fri 00:01 23:59
after-hours day Sat 00:01 23:59
after-hours block pattern 1 900    >> 9 is prefix

!

ephone 10

pin 12345

restart.

!

Now press  Login softkey button dial 12345

will be able to dial international starting 900..................

Thanks,

This has been asked already PLENTY of times before, the options are using the after-hours or there is a script which is not supported but does the job.

You can find info on both methods by just searching FAC + CME using the search box at the top right on the page.

Please search NetPro for answers before posting a question.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

asandborgh
Level 4
Level 4
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: