Configure second line in ATA 187

[alexageorge]

I am having an ata 187, which i successfully added in the call manager (ver 8.6.2). Now i need to add the second line in the ata and connect a another device there. Please help me with the configuration for the same. Also do we need any additional license for enabling the second line.

Regards,

Alex George

[Dragan Ilic · Accepted solution]

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/187/1_0/english/administration/guide/sip/187adm80/a187_ag2str.html#wp1102295

Second port is new device with MAC shifted and add "01" at the end.

You would need additional essential UCL license for this...

HTH,

Dragan

[MitchWalton56803]

It is worth mentioning that the first two characters in the mac addressed are removed from mac address to create the second device which gets the 01 is added at the end.