04-21-2009 06:09 AM - edited 03-15-2019 05:34 PM
hi,
Is it possible to configure a router to be a sip server?
I wanna do this for test a SIP link with a Linksys SPA9000.
Best regards
04-21-2009 11:40 AM
Try this:
voice service voip
sip
registrar server
!
!General SIP Configuration
voice register global
mode cme
source-address port 5060
max-dn 12
max-pool 12
timezone 21
time-format 24
date-format D/M/Y
call-forward system redirecting-expanded
create profile sync 0834091551485351
!Configuration for your client
voice register dn 2
number 10
allow watch
name
no-reg
label
mwi
voice register pool 2
id mac 1111.2222.3333
number 1 dn 2
dtmf-relay rtp-nte
username password
codec g711alaw
!If some commands are not understood from your CCME, upgrade the IOS.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
