Is it possible to configure the router for switching on outgoing calls?
I have the following config:
dial-peer cor custom
dial-peer cor list INT
dial-peer cor list MB
dial-peer cor list NATLOC
dial-peer cor list NOACCESS
dial-peer cor list INTERNATIONAL
dial-peer cor list MOBILES
dial-peer cor list NATIONALLOCALS
dial-peer voice 3 pots
dial-peer voice 1 pots
description Nationals and Locals
dial-peer voice 2 pots
description Mobiles or Cellular
On my router, I have a GSM card.
The router has too PSTN using an ISDN PRI line.
The phones are configured with this and they work properly.
The thing is when someone is on the phone (to a mobile phone), the router makes this call using the GSM card (because of the dial peers). CORRECT
But, on that moment, when someone else tries to make a call to a MOBILE PHONE, he simply can’t, because the router tries again to make the through the GSM card that is busy at that moment.
So my question is:
Is it possible to, on those moments, make the router go out using the secondary number ([DID - Direct Inward Dialing] through PSTN using an ISDN PRI)???
CME(config)#ephone-dn 1 dual-line
number 01 secondary 21311601 <-- Example of secondary number for external calls (21 is the code of my city, Maputo)
Thanks for the reply, Paolo.
But how do I do this?
Thanks for yor time.
Do you have an understanding od dial-peers? If you don't, can study dcumentation, search the forum, or engage a professional that will do everything for you.