cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1033
Views
0
Helpful
6
Replies

Configuring external calls in CUCM 8.6

hugomdbaez
Level 1
Level 1

Hello to all ,

I have a CUCM 8.6.2.20000-2 and I need to configure the external calls . In the past we has configured the calls and gateways in MGCP , but today we need to configure in H.323 :

GATEWAY CONFIGURATION ( MGCP Configured )

!

voice service voip

h323

!

!

voice class codec 1

codec preference 1 g711ulaw

codec preference 2 g711alaw

codec preference 3 g729r8

codec preference 4 g729br8

!

!

!

voice class h323 1

h225 timeout tcp establish 2

!

!

!

!

voice class custom-cptone 1

dualtone disconnect

  frequency 450

  cadence 300 200

!

!

!

!

ccm-manager fallback-mgcp

ccm-manager mgcp

!

!

mgcp

mgcp call-agent X.X.X.X 2427 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

!

mgcp profile default

!

Thanks for the help !

Hugo

6 Replies 6

Jaime Valencia
Cisco Employee
Cisco Employee

There are plenty of docs on CCO on CUCM with H323 configuration, have you searched for any of those and tried to follow the instructions???

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Hello javalenc ,

Thanks for your time , I am looking for an expert user who can give me some advice in this problem .

I still trying to resolve this

And what problem is exactly you're facing??? your post only mentions you want to configure calls using H323 and for that the links on CCO will suffice

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Leonardo Santana
Spotlight
Spotlight

Hello Hugo,

Take a look on this links:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b06gtway.html#wp1311511

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/cisco_ios_h323_configuration_guide/old_archives_h323/4gwconf.html#wp1151922

Take a look on CUCM Guides and Documentations like Jaime mentioned...

Thanks

Regards
Leonardo Santana

*** Rate All Helpful Responses***

Thanks Leonardo and Jaime :

I am reading the documentation now . My problem is with the outbound calls , I guess is about dial-peer voice configuration in h323 .

Thanks in advance

Hugo

You need the dial-peers pointing to the PSTN, and you need to send the digits on the format accepted by the Telco.

If you are using an E1/T1 you use a pots dial-peer or if you re using a SIP Trunk you use a voip dial-peer pointing to the SIP Proxy.

Take a look on this doc:

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/dial_peer/dp_confg.html

Rate this if helps you

Regards

Leonardo

Regards
Leonardo Santana

*** Rate All Helpful Responses***