Connect cisco spa 525G ip phone to call manager 8.6

[mos998811]

Dear All

I have some IP phones model SPA 525G and i would like to register them with CUCM V8.6, i tried to configure it as a SIP Third parity and make a template for it on the Call Manager exactly like i do with iphones but the status is always unknown

please can anybody help me to solve this issue?

BR

[ronpatel]

HI

Configure it as third party phone in CUCM and make sure you used the line DN as password in digest and phone configuration.

Regards

Ronak Patel

Rate helpful posts by clicking stars below the answer.

[mos998811]

Ronak

Thank you so much for your response

but can i ask you to give some more details on how to do that? that would be very nice from you

i config. it as a sip third parity with basic config

how can i use the line DN as password in digest and phone configuration?

BR

[ronpatel]

Hi,

Please follow below procedure and in place of any password use the DN number which you are going to assign to the SPA phone.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_1/ccmcfg/b09sip3p.html

Regards

Ronak Patel

Rate helpful posts by clicking stars below the answer.