10-28-2014 01:08 PM - edited 03-17-2019 12:43 AM
10-28-2014 10:07 PM
Hi george
I have 7911 sip phone working fine with CUCM .You have a CME or a CUCM ?
Please check the below links for more information
CME : http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/33matrix.html
CUCM :http://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-callmanager/products-device-support-tables-list.html
Hope this will be helpful .If so dn't forget to rate the answer !!
11-05-2014 08:36 AM
Hi,
11-05-2014 08:44 AM
You can also check
SIP Firmware Upgrade Issues
Reference : http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7900_series/firmware/9_3_1SR1/release_notes/P790_BK_R4E1E768_00_rn-9_3_1_sr1-7900-series/P790_BK_R4E1E768_00_rn-9_3_1_sr1-7900-series_chapter_00.html#CUIP_TP_S36DC613_00
Regards
Aateek Singh
Network Engineer
Spooster IT Services
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: