Corded Headsets

[Jacob Webb]

I just migrated from a Nortel VoIP system (CS1000 with E1120 phones) to CUCM 8.6.2 with CP7942G phones and the stupid Plantronics headsets don't work.  I read in another post about using a new piece below the breakaway: 

Part#Amp-26716-01

I just wanted to verify that this would be different than the Nortel phone.  Anyone have experience with a Nortel to Cisco migration using Plantronics wired headsets?

[Rob Huffman · Accepted solution]

Hi Jacob,

That is definately the part you need We've

done the exact migration and had to buy many

26716-01 ends.

Cheers!

Rob

"A smile relieves a heart that grieves" 

- Stones

[Jacob Webb]

Awesome.  Thank you for the confirmation!

[Rob Huffman]

Hi Jacob,

You are most welcome!

You'll notice a significant difference in the pin-out and even the color of the

RJ end on the 26716-01's

Cheers!

Rob

"A smile relieves a heart that grieves" 

- Stones