cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
459
Views
10
Helpful
5
Replies
Highlighted
Beginner

CSF Phone configuration Find button

We have two clusters.

1 here in the US and 1 in Germany.

The one in Germany has a "Find" button next to the "Owner User ID" and one next to the "Primary Phone" entries.

Find Button.PNG

Anyone know how to enable this on our CUCM here in the US?

I opened a TAC case and they say they dont have it either. LOL

Thanks in advance for any help.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Advocate

It's a service parameter for how many items that need to be in a search for the find button to appear. I don't have a system at hand at the moment, so I can't check the exact name for this SP.

Let me know if you find it, otherwise I'll look at it tomorrow when at work.

Sent from Cisco Technical Support iPhone App

Please rate all useful posts

View solution in original post

5 REPLIES 5
Highlighted
Advocate

It's a service parameter for how many items that need to be in a search for the find button to appear. I don't have a system at hand at the moment, so I can't check the exact name for this SP.

Let me know if you find it, otherwise I'll look at it tomorrow when at work.

Sent from Cisco Technical Support iPhone App

Please rate all useful posts

View solution in original post

Highlighted

Maybe in the Enterprise Parameters?

It will only let me go down to 250 on the Max lookup Items..

I have 150 Users on this system. My other system has 1600+.

grrr... so close! It is such a pain adding the primary phone this way...

Highlighted

Woot!!!

Found it. your answer got me part way there. It wasnt the "Max Lookup" but rather the "Max List Box Items".

Set it down to 100 and BAM there it is on the phone config page!

Very nice.

Good going Roger!! TAC is still trying to figure it out! LMAO...

****UPDATE****

This is so much easier! now i can do with one web page what i had to do with 3 open!

Highlighted

Right on, that's the SP I referred to. I can't believe that TAC didn't know about this. You must have got a real newbe as the case handler :)

Thanks for the nice rating and for marking the question as answered.

Sent from Cisco Technical Support iPhone App

Please rate all useful posts
Highlighted

As an update i would like to say that I requested closure on the TAC case and then got a call from them asking what it was I did to fix it!! LMAO.

I told them my consulting fee is 250 dollars an hour...