csim star

[ricardorojas123]

When I enter the command csim star number, example, csim star 2000, my ephone don't ring, WHY? (the calls between phones are successfull).

[Rob Huffman]

Hi Ricardo,

Hope all is well :) It must be entered this way;

csim start

Note: start not star

Hope this helps!

Rob

[ricardorojas123]

Rob, I enter:

Router#csim start

?

[mattcalderon]

example:

csim start 918005464454

/endexample

Use the above only input your own information.

Note: This can only be used with H323 gateways and then only if you have your dial-peers configured correctly.

MC

[ricardorojas123]

I enter the command but the phone don't ring.

The dial-peer is configured in the Gateway.

The phone is registered in the Call Manager Express.

And this message is show:

Router#csim start 2001

csim err:csim_do_test invalid major major(16) minor(0)

[mattcalderon]

Is the DN you are trying to call part of your ephone configuration? I am not sure if you can use the csim start command to call an ephone vs a regular analog line or PRI. I could be wrong. Paulo or Rob may know though.

[ricardorojas123]

Is a Call Manager Express version 4.1 in a Router 2800, and this have the dial-peer configured.