03-24-2008 08:25 AM - edited 03-15-2019 09:36 AM
When I enter the command csim star number, example, csim star 2000, my ephone don't ring, WHY? (the calls between phones are successfull).
03-24-2008 08:33 AM
Hi Ricardo,
Hope all is well :) It must be entered this way;
csim start
Note: start not star
Hope this helps!
Rob
03-24-2008 09:01 AM
Rob, I enter:
Router#csim start
?
03-24-2008 09:14 AM
example:
csim start 918005464454
/endexample
Use the above only input your own information.
Note: This can only be used with H323 gateways and then only if you have your dial-peers configured correctly.
MC
03-24-2008 12:38 PM
I enter the command but the phone don't ring.
The dial-peer is configured in the Gateway.
The phone is registered in the Call Manager Express.
And this message is show:
Router#csim start 2001
csim err:csim_do_test invalid major major(16) minor(0)
03-24-2008 12:39 PM
Is the DN you are trying to call part of your ephone configuration? I am not sure if you can use the csim start command to call an ephone vs a regular analog line or PRI. I could be wrong. Paulo or Rob may know though.
03-24-2008 12:46 PM
Is a Call Manager Express version 4.1 in a Router 2800, and this have the dial-peer configured.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide