I have been working on getting FXS attached devices to be able to make calls (mostly faxing) from a remote site thru our corporate PRI. I have setup the GW in CUCM as H.323 and given it a CSS of "PSTNGateway_CSS" which contains my Internal_PT, VM_Pilot_PT, and Blocked_PT. I have found that I am not able to make outbound calls from FXS connected devices since I do not have any external patterns in those partitions which would be tied to a route list.
My question is:
What is the best practice for H.323 GW configurations in CUCM when you have an FXS card in the router?
Generally, the best practice for a GW is to only give it access to internal patterns (extensions or pilots) so as not to risk toll fraud. However, that is counter productive when you have FXS ports that need to be able to dial the outside world.
IntroductionThe IssueServices Shown their status as UnknownWhat actions require to be taken?Logs required for troubleshootingWhat to expect in the logs:
The purpose of this document is to provide troubleshooting insight into a well-known iss...
New Cisco Champion Radio release on Zero Trust for WebexListen: https://smarturl.it/CCRS8E14 Follow us: https://twitter.com/CiscoChampion Cisco introduced End to End (E2E) Encryption in 2008 as a Webex Meeting option where only the me...
Community Live- Tour of the Real-Time Monitoring Tool
(Live event - Tuesday, 20 April, 2021 at 10:00 am Pacific/ 1:00 pm Eastern / 7:00 pm Paris)
This event will have place on Tuesday 20th, April 2021 at 10:00 hrs PDT
Learn: How to configure Cloud Connected PSTN with Webex Calling
CCP Provider Name
Product Home Page Link
Webex Calling Region
Countries Supported by Provider
Free Trial Link
Contact Provider Link
FR & LU
Meet the Authors Video - Leveraging SBCs to Empower a Changing World of Collaboration
(Live event – Tuesday, 16th, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event had place on Tuesday 16th, February 2020 at 10am PST ...