cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1274
Views
0
Helpful
2
Replies

CUBE & Codec negotiations...

Gordon Ross
Engager
Engager

In my CUBE, I have two inbound dial-peers from third party services, and an outbound dial-peer to CUCM:

 

voice class codec 1
 codec preference 1 g711alaw

!

voice class codec 2
 codec preference 1 g722-64
 codec preference 2 g729r8
 codec preference 3 g711alaw

...

dial-peer voice 1 voip

  description Inbound DP-1

  ...

  !Note, no codec preferences listed

dial-peer voice 2 voip

  description Inbound DP-2

  voice-class codec 1

  ...

dial-peer voice 3 voip

  description Outbound DP to CUCM

  !Note, no codec preferences listed

...

 

The theory is, is that dial-peer 2 will only access G.711 codec, dial-peer 1 will accept anything, and CUBE will send anything to CUCM.

 

In reality, dial-peer 1 doesn't work. It fails due to codec mismatch. But if I add "voice-class codec 2" to the CUCM outbound dial-peer, then both dial-peer 1 & 2 work.

 

Why? Why does setting the codec preference on the outbound dial-peer allow the inbound dial-peer to match?

 

Gordon.

Please rate all helpful posts.
2 Replies 2

Brandon Buffin
VIP Alumni
VIP Alumni

Default codec for a voip dial peer is g.729. What is the CUCM configuration? Does it alllow g.729? If not, this would explain dial peer 1 not working. As for adding the voice-class codec command, both dial peers work? I understand dial peer 2 working at this point because inbound/outbound match on g.711.

 

Brandon

Ayodeji Okanlawon
VIP Alumni
VIP Alumni

The picture is not complete so any suggestions here are based on assumptions. 

First of all.. Cube will not accept any call on a matched dial peer if the codecs offered do not match what is configured on that dial peer, because technically it can't negotiate those capabilities. 

So in this case if your ITSP sends g711u and g729,then cube will reject the call immediately. So for CUBE to accept a call the codec offered must match one in the dial peer 

Please rate all useful posts
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: