cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

117
Views
0
Helpful
0
Replies
Highlighted
Beginner

CUBE - Network Based Recording

hi,

I have reviewed the documentation and this community but I don't have been able to configure Network Based Recording in CUBE.

My environment is:

   - CUCM 10.5

   - VGW 3925 IOS 15.6(3)M8

 

IOS configuration:

http client cache memory file 2500
http client cache refresh 864000
ip http server
ip http authentication local
ip http secure-server
ip http max-connections 100
ip http timeout-policy idle 60 life 86400 requests 10000
ip http client source-interface <loopback cube>

uc wsapi
 message-exchange max-failures 2
 source-address <loopback cube>
 probing interval keepalive 5
 probing max-failures 5
 !
 provider xmf
  remote-url 1 http://<cucm call processing>:8090/ucm_xmf
end

and I always got:

show wsapi registration all
Provider XMF
=====================================================

I use the VGW's loopback as destination address of the SIP Trunk to VGW.

 

I don't know where is the error. I have the following licenses:

Suite License Information for Module:'c3900'
--------------------------------------------------------------------------------
Suite                 Suite Current         Type           Suite Next reboot
--------------------------------------------------------------------------------
FoundationSuiteK9     None                  None           None
securityk9
datak9

AdvUCSuiteK9          None                  None           None
uck9
cme-srst
cube

Technology Package License Information for Module:'c3900'

------------------------------------------------------------------------
Technology    Technology-package                  Technology-package
              Current              Type           Next reboot
------------------------------------------------------------------------
ipbase        ipbasek9             Permanent      ipbasek9
security      None                 None           None
uc            uck9                 Permanent      uck9
data          None                 None           None

Appreciate any comments.

 

[UPDATE] The issue was an access-list. now working without problems except with CVP. Seem that it is supported with CVP Survivability TCL scripts with Cisco IOS 15.6(1)T. 

 

Regards,

CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey