cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1728
Views
0
Helpful
4
Replies

CUBE sends SIP Cancel to CUCM

ilyas.safarov
Beginner
Beginner

Hello ,

 

CUCM => (SIP) => CUBE => ISDN(E1) (PSTN)

 

Inbound calls suddenly stopped work. Router receives the call on POTS dial-peer , sends to CUCM via SIP. Once the router receives Trying and Ringing from CUCM , it immediately sends Cancel to CUCM with Reason: Q.850;cause=47.

 

Attaching debugs. 

 

Would appreciate your help,

 

Thanks in advance

Ilyas

4 REPLIES 4

Ritesh Desai
Contributor
Contributor

Hi,

 

please share the calling number, called number and timestamp to look into debugs.

*** Please rate helpful post. Please mark as answer if it solves your problem/query.
regards, Ritesh Desai

Hi Ritesh,

 

Thanks for reply.

 

Calling number : 502892796

Called : 5655620

 

There is only one inbound call in all debug files.

@ilyas.safarov have looked at the logs you uploaded.

between CUCM and Voice Router you have SIP trunk. 

Before the CANCEL event, below is the error being reported. 

Sending CANCEL to the transport layer
Jul 7 08:46:54.675: //1648807/3E46959A8127/SIP/Transport/sipSPITransportSendMessage: msg=0x66B8C2C0, addr=192.168.3.10, port=5060, sentBy_port=0, local_addr=, is_req=1, transport=1, switch=0, callBack=0x347EA070

 

Make sure your SIP trunk between Voice Router and CUCM is UP. I suspect voice router is unable to communicate with CUCM 192.168.3.10, port=5060.

 

SIP CANCEL event

Jul 7 08:46:54.675: //1648807/3E46959A8127/SIP/Info/ccsip_call_statistics: Stats are not supported for IPIP call.
CANCEL sip:5655620@192.168.3.10:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.3.1:5060;branch=z9hG4bK22523A4
From: <sip:502892796@192.168.3.1>;tag=11F85B0-203B
To: <sip:5655620@192.168.3.10>
Date: Tue, 07 Jul 2020 08:46:54 GMT
Call-ID: 3E49A2FB-BF6511EA-87EEEB8A-D84D5E44@192.168.3.1
CSeq: 101 CANCEL
Max-Forwards: 70
Timestamp: 1594111614
Reason: Q.850;cause=47
Content-Length: 0

 

can you attach below details here please.

- show running config

- show dial-peer voice inout

- show inventory

 

Suggestion, next time when you enable the traces and share it, share it in single file rather in multiple files.

*** Please rate helpful post. Please mark as answer if it solves your problem/query.
regards, Ritesh Desai

Issue was resolved after Router restart :))
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: