CUBE SIP to SIP full E.164 ANI

[paolo bevilacqua]

Try updating IOS. If still trouble, you can use a voice translation-rule or SIP profile to add it back.

[etamminga]

What IOS version are you running, I've seen similar behavior on 15.1(3)T. I've seen this in one direction only, from cucm to itsp. In the other direction, itsp to , the gateway sends the full +e164 number (which is what I want).

Outbound

Dial-peer voice 1 VoIP

Destination pattern .T

!

Inbound

Dial-peer voice 2 VoIP

Destination-pattern +3130.......

!

When adding a second outbound dial-peer that starts with destination pattern +.T the + is send!

Regards,

Erik

Sent from Cisco Technical Support iPad App

[Alexandru Zamfir]

Yes, the problem is inbound and already using latest IOS for this old box 15.1.3T4. Seems like a bug, right? I manage to add it back via a trans rule and not a sip profile but anyway I want to know if this is normal behavior or maybe o config issue or just a bug.

Thanks a lot,

Alex.