This is a CCNR request from Alcatel
| (762889:000015) 1243: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 159 desti: 0 source: 15 cryst: 1 cpl: 13 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : SETUP [05] Call ref : 00 1b
| SENDING COMPLETE
|______________________________________________________________________________
|
| IE:[04] BEARER_CAPABILITY (l=2) a8 80
| IE:[18] CHANNEL (l=1) a8 -> T2 : No B channel
| IE:[1c] FACILITY (l=60)
| [9f] Discriminator of supplementary service applications
| [aa] NFE (l=6):
| [80] Source Entity (l=1) End_PTNX
| [82] Destination Entity (l=1) End_PTNX
| [a1] INVOKE (l=38):
| Invoke Ident. : 2efb (12027)
| OP: 001b (27)
| [30] Sequence (l=29)
| [a0] Context specific (l=7)
| [80] Context specific (l=5) 34 35 35 31 31
| [80] Context specific (l=5) 34 35 30 37 35
| [40] Application (l=5) 04 03 80 90 a3
| [8c] Context specific (l=1) ff
| [8d] Context specific (l=1) ff
This is an answer from Cisco router.
______________________________________________________________________________
| (762890:000020) Concatenated-Physical-Event :
| long: 22 desti: 0 source: 0 cryst: 1 cpl: 13 us: 0 term: 0 type a5
| tei: 0 >>>> message received : REL COMP [5a] Call ref : 80 1b
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 80 e4 -> [e4] INVALID INFORMATION ELEMENT CONTENTS
|______________________________________________________________________________
Looks like it is not configured properly for QSIG as it does not "understand"
FACILITY request.
