cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
713
Views
0
Helpful
2
Replies

CUCM 10.5 - PLM - Certificate Error

wilsonsant
Level 6
Level 6

Hi Guys, 

The PLM page is presenting error certificate. I verified the NTP and is syncrhonized.  I believe that the problem is related with date. When I try

change the date is requested for me delete all NTP, but, when I try to delete the CUM don´t let. 

admin:set date 15:32?
Syntax:
set date HH:mm:ss:MM/DD/YY

HH:mm:ss : The time format (24 hours format)
MM/DD/YY : The date format.

Note: Following format is also accepted:
MM/DD/YYYY : The date format.


admin:set date 15:32:00/02/07/2017
This server, is configured to synchronize with external NTP
server(s). Date/time cannot be changed on this server.

Please delete all of the configured external NTP servers.

Command is unsuccessful.
admin:
admin:
admin:utils ntp server delete
1: 10.12.1.1
a: all
q: quit

Choice: 1

Restart NTP (y/n): y

10.12.1.1 will be deleted from the list of configured NTP servers.
Continue (y/n)?y

10.12.1.1 : [The NTP server was not deleted. At least one NTP server is required.]

I used the information about two links without sucess:

https://supportforums.cisco.com/discussion/12104251/security-error

http://www.cisco.com/c/en/us/support/docs/cloud-systems-management/prime-license-manager/200224-Troubleshoot-Common-Issues-in-ELM-PLM.html

Any have idea, about this?

Thanks

Wilson

1 Accepted Solution

Accepted Solutions

Chris Deren
Hall of Fame
Hall of Fame

What is the error you are getting?

Post a screen shot and the exact URL you are accessing.

Do you have self signed Tomcat cert or is the cert signed by trusted CA?

View solution in original post

2 Replies 2

Chris Deren
Hall of Fame
Hall of Fame

What is the error you are getting?

Post a screen shot and the exact URL you are accessing.

Do you have self signed Tomcat cert or is the cert signed by trusted CA?

wilsonsant
Level 6
Level 6

Hi Chris,

Thanks a lot for Your contact. After to do post, I change the date in Gateway (the gateway was

wrong time) and the solve problem. The CUCM that I am doing test is related my laboratory.

The message was "Error certificate"

Thanks,

Wilson

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: