ā05-06-2015 12:32 PM - edited ā03-17-2019 02:55 AM
Hi All,
I am upgrading to cucm 10.5, my question is there any configuration need to be done in the gateways before the upgrade, or i can use same config while the ip address still the same?
Solved! Go to Solution.
ā06-02-2015 08:00 AM
ā06-02-2015 08:03 AM
Hi zoro072011,
you are welcome. Can I consider this question answered? Do you need any more info?
Regards.
ā05-29-2015 09:20 PM
Hi,
you can use the same config while the IP Address still the same.
Hope this helps.
ā06-01-2015 10:17 AM
Hi,
Yes everything will be the same accept we adding E.164 dial plane, I do not need to configure anything for that in the gateways, do I?
ā06-01-2015 08:32 PM
Hi zoro072011,
your gateway is MGCP or H.323?
If it is MGCP then you only need to make changes in CUCM, but if it is H.323 you must make changes in CUCM and in the gateway.
Regards.
ā06-02-2015 04:42 AM
Hi Marcelo,
My Gateway is MGCP, thanks so much
ā06-02-2015 08:00 AM
.
ā06-02-2015 08:03 AM
Hi zoro072011,
you are welcome. Can I consider this question answered? Do you need any more info?
Regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide