Hello,
Please help!
CUCM 11.5.1.11900-26
VG 2921 Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.4(3)M3
configured transcoder and conference bridge in voice gateway, verified connectivity, verified the name, tried no sccp, sccp commands, tried reboot of both CUCM and Gateway no luck
In CUCM
Transcoder: JUMXCODE (JUMXCODE)
Registration: Unknown
IPv4 Address: None
IOS Transcoder Info
Transcoder TypeRequired Field Cisco IOS Enhanced Media Termination Point
in Gateway
SCCP Admin State: UP
Gateway Local Interface: GigabitEthernet0/0
IPv4 Address: 10.11.20.11
Port Number: 2000
IP Precedence: 5
User Masked Codec list: None
Call Manager: 10.100.20.11, Port Number: 2000
Priority: 2, Version: 7.0, Identifier: 2
Call Manager: 10.100.20.10, Port Number: 2000
Priority: 1, Version: 7.0, Identifier: 1
Transcoding Oper State: ACTIVE_IN_PROGRESS - Cause Code: SOCKET_OPEN_FAILED
Active Call Manager: NONE
KCH-JUM-VG1#sh media resource status
Resource Providers:
Resource Provider ID :: FLEX_DSPRM Status :: REGISTERED
Service Profiles
MTP ::
TRANSCODING :: 1
CONFERENCING :: 2
Applications :
Application ID : SCCP, Status : REGISTERED
Application ID : CUBE, Status : REGISTERED
Configuration
voice-card 0
dspfarm
dsp services dspfarm
sccp local GigabitEthernet0/0
sccp ccm 10.100.20.10 identifier 1 priority 1 version 7.0
sccp ccm 10.100.20.11 identifier 2 priority 2 version 7.0
sccp
!
sccp ccm group 1
bind interface GigabitEthernet0/0
associate profile 1 register JUMXCODE
associate profile 2 register JUMCONF
switchover method immediate
switchback method immediate
switchback interval 3
!
dspfarm profile 1 transcode universal
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
codec g729br8
codec g729r8
codec ilbc
codec pass-through
maximum sessions 5
associate application SCCP
!
dspfarm profile 2 conference
codec g729br8
codec g729r8
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
codec ilbc
maximum sessions 2
associate application SCCP
