cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
793
Views
0
Helpful
2
Replies

CUCM 7 and OCS

QPM277111
Level 1
Level 1

Hi,

We have configured OCS server and now we need to start configuration is cisco call manager. We have configured a SIP trunk. However we are not able to make any calls internally or externally from OCS.

Can anyone help us out with this. Is there any configuration document available.

Regards,

Manish Gupta

2 Replies 2

William Bell
VIP Alumni
VIP Alumni

Hey Manish,

You can try one of these links to see if they help:

1. Microsoft Office Communications Server 2007 R2 Enterprise Edition using Direct SIP to Cisco Unified Communications Manager 7.1(3)

http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns728/ns784/861590.pdf

2. Microsoft Office Communications Server 2007 R2 Enterprise Edition using Direct SIP to Cisco Unified Communications Manager 7.1(3) Simultaneous Ring Feature

http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns728/ns784/873601.pdf

3. Microsoft OCS 2007 R2 with Microsoft Mediation Server via Cisco Unified Border Element (Enterprise Edition) 1.4 to Cisco Unified Communications Manager 7.1 using SIP

http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns728/ns784/8464511.pdf

You may also want to take a quick look at CUCIMOC:

http://www.cisco.com/en/US/products/ps10317/index.html

HTH.

Regards,
Bill

Please remember to rate helpful posts.

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

Hey Bill,

Thanks for the info. With the documents below i was able to solve major problems. However i am using same extensions for OCS as IP phones.

Currently i am facing below issues,

1. Not able to reach MOC extension from external world.

2.can we make Cisco IP phone and OCS communicator ring simulataneously

3. When i call from cisco phone or vice versa i do see extensions but not names.

Regards,

Manish