cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1215
Views
31
Helpful
20
Replies
Enthusiast

cucm 7.x web page cannot be displayed

Hi Zakariaa,

Please try with below link and see if it's help you out

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800e1691.shtml

Regards,

Nishant Savalia

Regards, Nishant Savalia

cucm 7.x web page cannot be displayed

Hi Nishant ,

      Sometime i can access to the GUI and i can browse into the grafical  interface for an delay 2 or 3 min ,after that the web page disappear and  i can't access to it anymore as the picture bellow :

Regards

Zakaria AZZOUZ

Highlighted

cucm 7.x web page cannot be displayed

Give it a shot bouncing tomcat... service in charge of the webpage

admin: 'utils service restart Cisco Tomcat'

Case sensitive...

Please Kudos/rate if this help!

Please Kudos/rate if this help!

cucm 7.x web page cannot be displayed

   I think my problem is with service Cisco Tomcat , When i restarted the service i can manage GUI for an delay of 2 min ( While the service is running ) . i don't know what is the problem exactly with that service :why it is become not activated all alone .

Cisco Employee

cucm 7.x web page cannot be displayed

Hi Zakariaa,

As pointed out initially in the post cucm version 7.x is not supported on vmware. If you are running it in the lab then the only option is to provide sufficient Disk and RAM. Also, as you already have 7.0 running it would not be a bad idea to upgrade it to version 7.1.5 ( could be a step upgrade ) as the lower versions of 7.0.x and 7.1.x have numerous Tomcat related bugs.

HTH

Manish

cucm 7.x web page cannot be displayed

Zakariaa,

Sorry I was away. Lets get to the root of this if you like.

Try this....

'Utils service restart Cisco Tomcat'

Let it run completly, it probably will crash your service... as soon its done trying to bring it up.. run...

'utils core active list'

If you find a core with a time Stamp of few minutes before... (running the reset), you must RUN

Utils core active analize

If you get mi this output I can look in to it, please make SURE your putty or SSH client has enought buffer, this output can be big.

Cheers

Please Kudos/rate if this help!

Please Kudos/rate if this help!
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards