ANNOUNCEMENT - The community will be down for maintenace this Thursday August 13 from 12:00 AM PT to 02:00 AM PT. As a precaution save your work.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2390
Views
0
Helpful
5
Replies
Highlighted
Beginner

CUCM 8.x and LDAP Integration with MS AD 2008 R2 64bit

Hey All,

I have read in the Cisco SRND for UC that you Microsoft Windows 2008 R2 64 bit Active Directory servers are not supported by Cisco for LDAP users. Can anyone confirm that this still works with CUCM 8.x? It not being supported is one thing, but it not working would completely suck.

Thanks

Marc

5 REPLIES 5
Highlighted
Frequent Contributor

CUCM 8.x and LDAP Integration with MS AD 2008 R2 64bit

We're running CUCM 8.6 against AD 2008 x64 without issue.

Highlighted

CUCM 8.x and LDAP Integration with MS AD 2008 R2 64bit

Hi, Paul.

Thanks for you confirmation. Great news. We have a CUCM 8.6.2.20000-2 Unrestricted and planning to upgrade MS AD 2008 64 bit.

Do you use LDAP Authentication or LDAP syncronization on your CUCM and AD?

Highlighted
Beginner

CUCM 8.x and LDAP Integration with MS AD 2008 R2 64bit

Here is an important link to verify the supported LDAP version for specific CUCM version:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/directry.html#wp1097641

Highlighted
Beginner

CUCM 8.x and LDAP Integration with MS AD 2008 R2 64bit

Hi, there, in the latest released SRND 9, the compatible Table in 8.x is no longer exist. I have the same question, our environment is 2008 r2 64 bit, is it supported by CUCM 8.x and 9.x? thanks Yvonne

Highlighted
Beginner

CUCM 8.x and LDAP Integration with MS AD 2008 R2 64bit

The Intergration should work as its listed in the link below for 9.x

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_0_1/ccmsys/CUCM_BK_CD2F83FA_00_system-guide_chapter_010011.html#CUCM_TK_C4E65231_00

Its just that its not Cisco tested.