cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1220
Views
0
Helpful
6
Replies

CUCM 8.x - Route group

Jean Lofrano
Level 1
Level 1

Hi team,

I have a CUCM 8.5 here.

So, I want to create a route group, but I don´t have available devices in call routing> route/hunt > .route group.

Can you help me please?

the print file was attached.

thanks.

6 Replies 6

Ayodeji Okanlawon
VIP Alumni
VIP Alumni

Hi Jean,

To add a device to a route group, you need to first of all create the device/gateway/sip trunk

Have you added a gateway/sip trunk in cucm? using device>gateway> add new

Please rate all useful posts

Yes I have!

I Have a environment with 3 sites (1 CUCM and 2 CME-SRST) working properly.

thanks

I´m using remote sites configured in gateway.

Are you saying you have configured gateways? What type of gateways did you configure? MGCP or H323

Please rate all useful posts

What that does mean?

I Have a environment with 3 sites (1 CUCM and 2 CME-SRST) working properly.

Do you have GWs or Trunks defined in CUCM?

If so if they are referened directly by Route Patterns you will not be able to add them to Route Groups, you first need to remove them from route Patterns.

HTH,

Chris

I have Gws defined in CUCM.

Ok, I will need a window for this.

thanks.