08-04-2014 05:31 AM - edited 03-16-2019 11:37 PM
Hello dear colleagues.
There is an issue with high CPU utilization on my UCS-C220-M3 CUCM 9.0.1 Subscriber with ESXi 5.5.
I have a cluster with publisher and one subscriber.
A problem with jump of CPU Utilization in Cisco RTMT.
You can see a printscreen of RTMT CPU Usage ang load average from ssh of subscriber server.
What kind of problems could be the reason of this issue.
I have 1.5.4 HUU firmware pack now.
I want to try upgrade my UCS to 2.0.1a firmware
Can it help me?
Thank you for your answers.
Solved! Go to Solution.
08-04-2014 06:50 AM
CUCM 9.0 has been deferred
There is no VM that matches those specs, and your CPU is a restricted performance CPU, you can only use one OVA option.
08-04-2014 05:36 AM
Upd.
I have about 450 users on my cluster.
VMware Installation:
1 vCPU: Intel(R) Xeon(R) CPU E5-2609 0 @ 2.40GHz
Disk 1: 160GB
8192 Mbytes RAM
08-04-2014 06:50 AM
CUCM 9.0 has been deferred
There is no VM that matches those specs, and your CPU is a restricted performance CPU, you can only use one OVA option.
08-04-2014 06:54 AM
I've install not from OVA file you are right, but it worked fine.
I know that in CUCM 9.1 and above you can use only OVA template when creating VM.
08-04-2014 06:57 AM
Then you're on a not supported system, and Cisco will not support your environment, with that CPU, you cannot use anything beside the 1K user OVA
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: