06-10-2014 12:10 AM - edited 03-16-2019 11:03 PM
Hi ,
I have a site with CUCM 9.1 and using MGCP GW.
I have an extension 5234 with a prefix applied for Calling Party for the outgoing calls like prefix 03112.
The Calling Party Selection is set as " First Redirect Number".
"call forward all" is set to an external mobile number on the extension 5234.
When someone calls on the extension 5234 and call is being forwarded, I see only the extension number(5234) as calling party in the MGCP GW while doing the ISDN q931. Can any please suggest why this is happening?
But when a call is made from the extension 5234, the calling party number is displayed as 031125234.
Faizal
06-10-2014 12:46 AM
Hi Faizal,
Its a coincidence, actually one of my customer just called me and told me the same observation which you have. I was searching CSC and found couple of below good discussions, these discussions may help you.
https://supportforums.cisco.com/discussion/11689661/call-forwarding-issue-cucm-86x
https://supportforums.cisco.com/discussion/11880926/external-no-cli-forwarding-calls-cucm
I will work out on it today evening and will share my findings.
Suresh
06-10-2014 01:07 AM
Check the CSS applied to CFA. Does it has access to that calling party transformation pattern ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide