CUCM and UCCX : Disk partition Swap is nearly full. Usage is 92%
We are on CUCM 12.5 and CCX 12.5, from time too time we get the swap disk partition going over 90% and gets stuck there.
Currently we resolve the issue by rebooting the affected server.
I have been reading up since the customer started asking questions on why the restarts from time too time and all I can see is either to open a TAC case to on/off the swap via root account or by rebooting the server,
Is there no other fix for this issue yet? It is something coming from CUCM 6.0 when CUCM moved from windows to linux and we still have no other way of clearing the swap partition?
Can one restart tomcat services or something rather than rebooting the server? In RTMT there is not really and process spiking or using the CPU when this happens.
So basically we are stuck with either change control and a reboot or a TAC case which is wasting TAC's time and our time?
I have read that before posting, my question is because we have monitoring and an alert gets generated every time this goes over 90% and is logged in the ticketing system, the client has a view of this. Thus the question, I know it is not a real big problem, but do we have a different way to release the swap "memory" without rebooting or using TAC to get the value below 90% if it gets stuck there for a long period, I know it comes down after a while but we have had cases where it stays at 98% and won't come down until we reboot the server.
No CLI command we can run without root privileges to clear the swap partition?
IntroductionThe States of a serviceIdentifying the problemServices remaining on starting stateSpecific services not startingNetwork services not startingA Cisco DB not startingCisco Intercluster Sync Agent not startingPresence Engine not startingCisco Syn...
IntroductionThe States of a serviceIdentifying the problemServices remaining on starting stateSpecific services not startingNetwork services not startingA Cisco DB not startingCisco Intercluster Sync Agent not startingPresence Engine not startingCisco Sy...
(view in My Videos)
Community Live- Tour of the Real-Time Monitoring Tool
(Live event - Tuesday, 20 April, 2021 at 10:00 am Pacific/ 1:00 pm Eastern / 7:00 pm Paris)
This event had place on Tuesday 20th, April 2021 at 10:00 hrs PDT
What is th...
Hello Admin Community!
I’m recruiting participants for an upcoming study looking at large meeting troubleshooting in Control Hub. If you’d like to participate, please fill out this quick, 2 min. survey. Thanks! https://www.surveymonkey.com/r/...
Don't you just hate having to run RTMT in a virtual machine, well here it runs in an app for mac. I have complied a version for CUCM 14.x ( from a version I got for 11.x ) It works on older versions also. Here it is https://haffi.is/rt...