cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3056
Views
0
Helpful
2
Replies

CUCM call auto disconnect

muhammad.cis
Level 1
Level 1

Hi,

We are using CUCM 8.5 BE. Sometimes it is reported that the call automatically disconnects after random period of time. Before the call disconnects, an announcement is played "Your call your call will be disconnected after 60 sec". This announcement is repeated after every 15 seconds and the call finally disconnects after 60 sec. The problem mainly occurs on calls made to UAE.

For one call, CDR CMR dump shows origCause_value = 16, destCause_value = 0 while for other origCause_value = 0, destCause_value = 16

Note: CDR Cause Codes say:

0 = No error

16 = Normal call clearing

Regards,

Muhammad

2 Replies 2

Jaime Valencia
Cisco Employee
Cisco Employee

Do you have MLPP configured??

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

No, MLPP is not configured.

We asked our PSTN provider to check this at their end. They had placed monitoring on daily usage limit. After they have made some change at their end, we have not faced the problem as yet.

Regards,

Muhammad

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: