cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1239
Views
15
Helpful
3
Replies

CUCM clone

Marc El Achkar
Level 1
Level 1

Hello,

I have a CUCM 8.6 running on VM which have a hard disk space of 500GB if i want to clone it with a smaller disk space so not everytime i do a backup it backsup 500GB, will i need new licenses for it to work after the clone?? or the current licenses will be working.

Thanks

Mark

3 Replies 3

Chris Deren
Hall of Fame
Hall of Fame

You will need to rebuild the VM with different OVA as resizing disk space is not supported on CUCM. You can use DRS backup/restore.

HTH,

Chris

Ok and will i need to generate a new license or the old license will work?

No, at least if you don't change any parameter during the installatio process.

The license gets associated to a license MAC, which is a 12  digit HEX value created by hashing the following parameters that you  configure on the server:

#

Time zone

#

NTP server 1 (or "none")

#

NIC speed (or "auto")

#

Hostname

#

IP Address (or "dhcp")

#

IP Mask (or "dhcp")

#

Gateway Address (or "dhcp")

#

Primary DNS (or "dhcp")

#

SMTP server (or "none")

#

Certificate Information (Organization,  Unit, Location, State, Country)

#

The ways to obtain the license MAC are as follows:

#

Before installation, use the Answer  File Generator (http://www.cisco.com/web/cuc_afg/index.html).  When you generate the answer file, you also get the license MAC.

Please rate all useful posts
Favor calificar todos las respuestas útiles.
_____________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice certified

__________________________________________________
Please remember to rate useful posts clicking on the stars below.
LinkedIn Profile: do.linkedin.com/in/leosalcie
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: