05-07-2018 04:46 AM - edited 03-17-2019 12:45 PM
Hi.. I am facing challenge with CUCM 11 pub and Sub as Subscriber is not showing registered under media resource >>conference bridge, although DB replica seems working as any change on Pub is reflecting on Sub also. I tried to reboot Sub as well but still same issue.
Find and List Conference Bridges
05-07-2018 07:26 PM
Hi.. I am able to access Pub network services from Sub, also I have restarted RIS services, even restarted both nodes bit no luck.
05-07-2018 07:49 PM
Hithere
Could you check the status of MTP & CFB under Cisco IP Voice Media Streaming >> Service Parameter. Is that set to True?
then try restarting the IPVMS service again on all nodes.
Cheers
Rath!
***Please rate helpful posts***
05-07-2018 08:52 PM
Hi.. i did same but no luck.
05-07-2018 09:15 PM
Hi.. can it be because of DB replication issue b/w cluster, i could see below error on Pub and Sub..
PUB-
admin:utils dbreplication runtimestate
Server Time: Tue May 8 09:35:56 IST 2018
Cluster Replication State: BROADCAST SYNC ended at: 2017-07-07-19-28
Sync Result: SYNC COMPLETED on 704 tables out of 704
Sync Status: All Tables are in sync
Use CLI to see detail: 'file view activelog cm/trace/dbl/20170707_192547_db l_repl_output_Broadcast.log'
DB Version: ccm11_5_1_12900_21
Repltimeout set to: 300s
PROCESS option set to: 1
Cluster Detailed View from UCM11-01-CONF (2 Servers):
PING DB/RPC/ REPL. Replication REPLICATION SETUP
SERVER-NAME IP ADDRESS (msec) DbMon? QUEUE Group ID (RTMT) & Details
----------- ---------- ------ ------- ----- ----------- ------------------
UCM11-01-CONF 192.168.211.143 0.015 Y/Y/Y 0 (g_2) (2) Setup Completed
UCM11-02-CONF 192.168.211.144 0.211 Y/Y/Y -- (-) (-) --
SUB--
admin:utils dbreplication status
command failed -- Enterprise Replication not active (62)
Replication status check is now running in background.
Use command 'utils dbreplication runtimestate' to check its progress
The final output will be in file cm/trace/dbl/sdi/ReplicationStatus.2018_05_08_0 9_34_38.out
Please use "file view activelog cm/trace/dbl/sdi/ReplicationStatus.2018_05_08_09 _34_38.out " command to see the output
admin:utils dbreplication runtimestate
Server Time: Tue May 8 09:35:12 IST 2018
Cluster Replication State: dbmonpreflightcheck file is not found.
DB Version: ccm11_5_1_12900_21
Repltimeout: Only available on the PUB
PROCESS option: Only available on the PUB
Cluster Detailed View from UCM11-02-CONF (2 Servers):
PING DB/RPC/ REPL. Replication REPLICATION SETUP
SERVER-NAME IP ADDRESS (msec) DbMon? QUEUE Group ID (RTMT) & DB Status
----------- ---------- ------ ------- ----- ----------- ------------------
UCM11-01-CONF 192.168.211.143 0.222 Y/Y/Y -- (-) (-) Replication Not Setup
UCM11-02-CONF 192.168.211.144 0.017 Y/Y/Y -- (-) (-) Replication Not Setup
05-08-2018 05:38 AM
Absolutely, you need to resolve your database replication issue first. There are many threads and document on how to accomplish that.
05-08-2018 07:30 AM
Oh Yes, thats the key issue here. Pls check out these links.
Hope this helps!
Cheers
Rath!
***Please rate helpful posts***
01-29-2024 12:58 AM
Restarting the RIS data collector service fixed my issue.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: