CUCM | configure SNMP alert for sip trunk perform reset\restart

[iptsupport]

Hello ,

we configure SNMP V2 in CUCM and I want to create trap that sip trunk perform reset\restart.

my CUCM version is 11.5
how I can configure it ?

[Roger Kallberg]

AFAIK you can not define specific traps for SNMP in CM. If you could it would be outlined in the administration guide document.

[iptsupport]

I understand , but if I perform reset to sip trunk

SNMP is it send alert ?

[Roger Kallberg · Accepted solution]

Not from my experience.