cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
455
Views
0
Helpful
2
Replies
Beginner

CUCM H225 stack process error similar to CSCtc48579

Hi Community Members,

We're facing an issue with incoming ISDN PRI calls from the PSTN. It only happens when calling from specific numbers.

isdn switch-type primary-dms100

In the CUCM trace I see the following error:

17:33:51.114 |ProcessH225Message::decodeUuie ** ERROR  rc=4

D0081S: End of input reached before message was fully decoded; check PDU #5 'H323-UserInformation'.

This looks like CSCtc48579, but this is the platform:

c2900-universalk9-mz.SPA.151-4.M2

Active Master Version: 8.6.1.20000-1

Already tested with the command "signaling forward unconditional" but no luck. Attached the complete UUIE error.

Thanks in advance.

Carlo

2 REPLIES
Highlighted
Beginner

CUCM H225 stack process error similar to CSCtc48579

Hi

I just opened a TAC case for this.

Regards

Carlo

Beginner

CUCM H225 stack process error similar to CSCtc48579

By the way, the problem was in the Voice GW I was using H.323 SS, changed back to FS (default) and that fixed the issue.

Regards

CreatePlease to create content
Ask the Expert- Firepower configuration & troubleshooting