Solved: CUCM Media paths

sofiane__ · ‎12-03-2020

Hi,

We have CUCM v12.5. I know that by default CUCM is not involved in a call after the call has been set up. My question: is there a way to configure media paths (RTP audio) the same as signaling paths, I mean the media exchange doesn't occur directly between the IP Phones but through the CUCM.

Thank you in advance

Sofiane

Jaime Valencia · ‎12-03-2020

Yes, but you would need to use TRPs/MTPs and that doesn't scale with CUCM, you would need external resources on an ISR.

HTH

java

if this helps, please rate

View solution in original post

Jaime Valencia · ‎12-03-2020

Yes, but you would need to use TRPs/MTPs and that doesn't scale with CUCM, you would need external resources on an ISR.

HTH

java

if this helps, please rate

sofiane__ · ‎12-04-2020

Hello Jaime,

Thank you a lot for assisting me !

This page gives the details :

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_0_1/systemConfig/cucm_b_system-configuration-guide-1201/cucm_b_system-configuration-guide-1201_chapter_0111011.html

Best Regards,

Sofiane