CUCM memory utilization

[andersson1970]

Hi,

SNMP string is configured on CUCM 8.0. We are able to get CPU utilization report on SNMP but not hard disk utilization.

Is there any configuration required on CUCM to get hard disk (memory) utilization logs to be sent to SNMP? How partition and hard disk (memory) utilization are different from each other?

Regards

Anderson

[Fred Nielsen (ePlus)]

Memory util on UCOS hosts can be monitored using entries in the

HOST-RESOURCES-MIB.  You can download this MIB and find specific OID's using Cisco's SNMP MIB tool.

Some detail on the MIBs to watch here: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/trouble/8_0_1/tbsnmp.html#wp1105319

[Mahmoud Simrin]

Hello Frederick,

Can you assist me in finding the specific OID's please ?

Regards

[Mahmoud Simrin]

Hello,

I am looking for the OIDs of the followings:

1-SWAP memory Usage

                Total SWAP memory

2-    Physical memory Usage

                 Total Physical memory

3- SWAP memory Usage 

                 SWAP memory  Free

4-     Physical memory Usage 

                 Physical memory Free

Regards

[nastrii21]

You can use the RTMT tool. Just log in to the CUCM admin and under the application select plugins the FIND. At the bottom is the RTMT download link and install it. Attach is a screen grab.