cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
94
Views
0
Helpful
1
Replies
Highlighted
Beginner

CUCM migration from UCS C200 to SAN based third party server

Hi all,

 

I am planning to migrate our UC applications from UCS c200 to a SAN based 3rd party server. Is vMotion supported from ESXi 5.0 DAS to SAN in vCenter? It is not clear at the link regarding regular vmotion for UC applications https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-software-requirements.html#vmotion. However, It mentioned in the article "Moving a shut down VM during a maintenance window, i.e. a "cold migration" or "host to host migration", is not vMotion and is supported", does that mean only copying of .vmdk file to a 3rd party server is supported?

 

Thanks in advance.

Everyone's tags (1)
1 REPLY 1
Rising star

Re: CUCM migration from UCS C200 to SAN based third party server

Yes, from the link you specified it is not clear whether you can use vMotion do perform migration from DAS-to-SAN. It only mentions about SAN-to-SAN (Prior to ESXi 5.1) and DAS-to-DAS (In ESXi 5.1+ ) but nothing about DAS-to-SAN or vice versa.

You can also use Cisco Prime Collaboration Deployment (PCD) application to migrate CUCM applications from one hardware to another hardware. In this case it does not matter whether you are migrating from DAS/SAN-to-DAS/SAN. But make sure that the SAN requirements are met as per this design guide:

https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-collaboration-storage-design-requirements.html

 

Please rate helpful posts and if applicable mark "Accept as a Solution".
Thanks, Vaijanath S.
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards