01-19-2019 06:23 AM - edited 03-17-2019 01:58 PM
Hello everyone
How do I configure a lobby Cisco ip phone to automatically dial a hunt pilot number when the lobby IP Phone goes off-hook ? Also when a DN in the hunt group picks up be able to have a camera conversation?
Solved! Go to Solution.
01-19-2019 06:57 AM
Hello,
Please see the below link-
And if the phones having video capability it will dial a video call you just need to ensure you have set sufficient bandwidth.
Thanks.
Please rate if it is helpful...
01-19-2019 08:12 AM
After looking at Anurag's (+5) link it includes both SIP and SCCP examples, so just follow that doc for the SIP steps.
01-19-2019 06:57 AM
Hello,
Please see the below link-
And if the phones having video capability it will dial a video call you just need to ensure you have set sufficient bandwidth.
Thanks.
Please rate if it is helpful...
01-19-2019 07:51 AM
Which phone model and protocol as SIP vs. SCCP require different configuration?
01-19-2019 08:09 AM
Hi Chris
8845. Sip protocol
01-19-2019 08:12 AM
After looking at Anurag's (+5) link it includes both SIP and SCCP examples, so just follow that doc for the SIP steps.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide