cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1687
Views
5
Helpful
4
Replies

CUCM PLAR

Nebbieaman
Level 1
Level 1

Hello everyone 

How do I configure a lobby Cisco ip phone to automatically dial a hunt pilot number when the lobby IP Phone goes off-hook ? Also when a DN  in the hunt group picks up be able to have a camera conversation? 

2 Accepted Solutions

Accepted Solutions

Anurag Srivastava
Cisco Employee
Cisco Employee

Hello,

 

Please see the below link-

https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/212073-CUCM-PLAR-Configuration-Example.html

 

And if the phones having video capability it will dial a video call you just need to ensure you have set sufficient bandwidth.

 

Thanks.

 

Please rate if it is helpful...

 

View solution in original post

After looking at Anurag's (+5) link it includes both SIP and SCCP examples, so just follow that doc for the SIP steps.

View solution in original post

4 Replies 4

Anurag Srivastava
Cisco Employee
Cisco Employee

Hello,

 

Please see the below link-

https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/212073-CUCM-PLAR-Configuration-Example.html

 

And if the phones having video capability it will dial a video call you just need to ensure you have set sufficient bandwidth.

 

Thanks.

 

Please rate if it is helpful...

 

Chris Deren
Hall of Fame
Hall of Fame

Which phone model and protocol as SIP vs. SCCP require different configuration?

Hi Chris

8845. Sip protocol 

 

After looking at Anurag's (+5) link it includes both SIP and SCCP examples, so just follow that doc for the SIP steps.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: